Product Details:
Usage/Application | Industrial |
Minimum Output Dew Point | -20 Degree C |
Frequency | 50 Hz |
Material | Mild Steel |
Automation Grade | Automatic |
Model No. | E TECH - LPD |
Flow rate | 1 to 10000 Nm / Hr |
Operating pressure | 0.5 -1 Bar |
Low-Pressure Air Dryer is passed over a special grade of desiccant in twin tower system. While one tower is under drying cycle, air is passed over an electrically heated other tower and carries out the moisture of this tower. Similarly based on time cycle change over takes place from the first tower to second to first. The operation is fully automatic.
Applications:
Product Details:
Usage/Application | Industrial |
Frequency | 50 Hz |
model name | E TECH - HD |
Flow rate | 5 to 3000 Nm/ Hr |
Dew Point | -40 to -60 Degree C |
Operating Pressure | 0.5 to 50 Bar |
Voltage | 415 V |
Reckoned as leaders in this industry, we are providing our esteemed clients with excellent quality Heatless Air Dryer. Our offered range is broadly used in various industrial applications. The offered dryer is manufactured using high-grade components and contemporary technology by our skilled experts.
We assure our clients that our range is quality tested on predefined parameters, in order to meet industry standards. Apart from this our prestigious clients can avail this dryer, as per their needs, at highly competitive price.
Features:
This is the simplest of all desiccant based air dryers. In this dryer, two desiccant towers are used. While one tower is in drying, the second tower undergoes regeneration simultaneously. Part of dry air coming out from tower in-line goes for regeneration of the second tower. Tower changeover takes place at every 5 minutes by a sequence controller mounted in control panel.
Product Details:
Usage/Application | Industrial |
Dryer Horse Power (HP) | 10 HP |
Frequency | 50 Hz |
Phase | 3 Phase |
Material | Mild Steel |
Automation Grade | Automatic |
Flow Rate | 5 to 4000 Nm3 / Hr |
Voltage | 220 V |
Weight: | 6000 Kg |
Power Source | Electric |
Minimum Dew Point | -40 Degree C |
Operating Pressure | 0.5 - 50 Bar |
Note : Price range starts from 5 Lakhs to 20 Lakhs per piece.
We have emerged as a leading organization, engaged in offering superior quality 10HP Heat Of Compression Air Dryer. Our offered air dryer is manufactured by our skilled professionals using high-grade components and latest technology in compliance with the industry quality standards. In addition to this, our provided air dryer undergoes various tests under the supervision of quality controllers to ensure its flawlessness. Our offered air dryer is available for our clients at a very convenient range of prices.
In non-lubricated air compressors, a great amount of heat is generated which is lost due to cooling in after cooler. In heat of compression type dryer, this heat is utilized to heat the air for regeneration. In this dryer hot compressed air is passed through a heater to maintain the temperature around 180 Deg C, which is then passed through the desiccant bed for regeneration. After taking out the moisture this air is cooled in an aftercooler where moisture is condensed and drained out in moisture separator. Then this cooled air is passed through the other tower of desiccant for drying.
Features:
Limitations:
Additional Information:
Product Details:
Automatic Grade | Automatic |
Frequency | 50 Hz |
Phase | 3 Phase |
Pressure | 0.5 to 12.5 Barg. |
Refrigeration | R22 |
Voltage | 415 V |
Capacity Range | 5 to 1000 Nm3/ Hr |
Dew Point | -23 Degree C |
Features:
Product Details:
Usage/Application | Industrial |
Minimum Output Dew Point | -20 C |
Frequency | 50 Hz |
Phase | 3 Phase |
Material | Mild Steel |
Automation Grade | Automatic |
Flow Rate | 5 to 4000 Nm3 / Hr |
Voltage | 380 V |
Operating Pressure | 0.5 - 50 Bar |
With the extensive knowledge and experience in this respective domain, we are engaged in offering high-quality Purge Loss Air Dryer. Our deft professionals only use high-grade raw material and the latest technology while manufacturing this air dryer. The offered air dryer is widely appreciated all over the nation for its salient features.
With our quality range, we are able to maintain a strong foothold in this industry. Moreover, we provide the entire range to our clients in various specifications and at affordable prices.
Features:
To save on purge loss, here part of the wet air is circulated through a heater thereby increasing its moisture carrying capacity, which is used for regeneration. In this type of dryer incoming wet air is divided between a distributor. 60-70% of wet air goes for drying while 30-40% of wet air is circulated through a heater thereby increasing its temperature which then takes out the moisture from the desiccant bed and then it is cooled in an aftercooler where moisture is condensed and drained out in moisture separator. This air is sent back to the distributor where it mixed with incoming air and distributed again.
Product Details:
Usage/Application | Industrial |
Dryer Horse Power | 10 HP |
Minimum Output Dew Point | -20 C |
Frequency | 50 Hz |
Phase | 3 Phase |
Material | Stainless Steel |
Flow Rate | 5 to 4000 Nm3 / Hr |
Weight | 6000 Kg |
Voltage | 220V |
Features:
Product Details:
Material | Stainless Steel |
Automation Grade | Automatic |
Voltage | 380 V |
Weight | 282 Kg |
Power(W) | 3.0 kW |
Inlet Pressure | 0.6 - 1.0Mpa |
Product Gas Pressure Dew Point | -40 to -70 Degree C |
Product Details:
Usage/Application | Industrial |
Minimum Output Dew Point | -20 C |
Automatic Grade | Automatic |
Maximum Pressure | 10 bar |
Frequency | 50 Hz |
Phase | 3 Phase |
Material | Mild Steel |
Flow Rate | 5 to 4000 Nm3 / Hr |
Maximum Air Inlet Temperature | 50 Deg C |
Dryer Type | Regenerative Desiccant Dryer |
Product Details:
Material | Mild Steel |
Automation Grade | Automatic |
Voltage | 380 V |
Capacity | 300 to 20000 Nm3/ Hr |
Maximum Pressure | 5 to 50 bar |
Maximum Air Inlet Temperature | 50 Degree C |
Dryer Type | Regenerative Dessicant Dryer |
Product Details:
Material | Stainless Steel |
Automation Grade | Manual |
Voltage | 380 V |
Dryer Type | Regenerative Dessicant Dryer |
Model Name | E TECH - IHD |
Flow rate | 5 to 4000 Nm/ hr |
Dew Point | -40 to -80 Degree C |
Operating Pressure | 0.5 - 50 Bar |
This is an improvised version of Internally Heated Air Dryer where purge air loss is very very low due to regeneration is achieved by dry air at low pressure and at high temperature. To achieve this heater are provided to heat the purge air to around 180 Deg C, which enhances its moisture carrying capacities. This hot purge air at low pressure is passed through the desiccant bed to regenerate with a small quantity of purge.
Features: